Terne can be painted as seen here or left to naturally patinate over time
Terne is an old English word for Tin (the metal). Terne clad (coated) stainless steel, or terne metal to which it is often referred in the industry is a special metal often used in restoration contexts, but has many applications.
Americans are most familiar with the Follansbee terne metal, no longer in fabrication, which was a zinc/tin alloy over top a stainless steel substrate.
The Europeans have long used tin in their construction. Their version of terne is a thick layer of 100% tin covering a 441 grade stainless steel base.
Tin is a breeze to solder, making our Terne stainless material supremely easy to work with.
Our Terne had been tested and approved for restoration, repair or new construction even in areas where it is planned to be used close to the old Follansbee terne. The terne is popular again with architects and designers for its weathering properties. It is another natural metal which weathers and changes over time. In the architectural world, it is difficult to find other alternatives in natural metals which are long-lasting and appropriate for outdoor, high environmental exposure use and still offer up an ever changing patina.
Tin comes with a slight sheen from the mill, but will patinate over time. It will take some time in the elements for the shine to cut and for the beautiful, soft matte gray to appear. In most environments, this usually happens rather quickly.
Tin, like copper has an extraordinary lifespan. When coupled with the strength of its stainless steel base to create our terne material, it is a product you can plan with permanence.
If green building is at the forefront of your efforts (it should be for everyone) the Terne is among the best material choices you can make:
We get asked a lot if there is any special care required. As with copper, just make sure to install the material with gloves and you won’t have problems with fingerprints. Other than that, you’ll be surprised how much everyone on the design/build team loves the material!
Terne comes in choice of coil or sheet. We are the material processor, so you may order the material just by itself and do your own forming, or you may elect to have us fabricate or form your systems, panels or pieces. Just let us know how we can best help you achieve your objectives.
Sheets: 1,160mm (45.6 inches) x 10 feet
Coils: Standard is 20 inch, but custom widths available upon request
All come in 26 gauge.
Here are some photos of terne “in action”:
Here are progress pictures of terne installation on an historic museum in Savannah GA. Check out the amazing seaming work. Terne is both durable and workable. See how our collaboration with the installers resulted in permanent, maintenance-free solutions for a complicated, convex roof:
Looking for terne in coil, sheet, or manufactured roofing and cladding systems and accessories like gutter? You’re in the right place. Call today!
© 2023 Spengler Industries. All Rights Reserved. | Privacy Policy