A hotel renovation begins with a building that already has a shape, a character and a way of operating. The roof may need replacement while the stonework stays. An entrance may be redesigned while guest-room wings remain in use. New wall cladding may have to meet existing windows, canopies and roof edges.
Those connections deserve attention early. They influence the materials, dimensions and fabricated details the project will need—and the appearance of the finished property.
For owners planning a substantial exterior renovation, Spengler Industries manufactures metal roofing, wall cladding and custom architectural metalwork for the building you are renovating. Start with the property you have, the changes you want and the full extent of the planned work.
The October 2026 storm preparations in Florida’s Panhandle make weather exposure a timely consideration. For a coastal resort, mountain lodge or hotel elsewhere, the lasting task is to specify an exterior appropriate to its architecture, location and intended use.
Define what stays and what changes
Begin with roof plans and exterior elevations that identify the areas to be renewed and the construction that will remain. Include additions, entrance buildings and other structures within the renovation program.
An existing hotel may have been altered several times. Confirm the dimensions and conditions needed for the new work, and identify where the design team needs further investigation. Window positions, wall depths, roof slopes and the construction behind existing finishes can affect the details being developed.
For a roof replacement, have the project team assess the supporting deck and its attachments. For wall cladding, establish the proposed support and the condition of the construction to which it will attach. Resolve required repairs with the appropriate project professionals before finalizing the fabrication scope.
This gives the owner a clearer purchasing brief. The quotation can address the surfaces being covered and the connections this particular building requires.
Give the renovated exterior a coherent appearance
Metal roofing and wall cladding offer ways to relate different parts of a property through pattern, proportion, color and material. An owner might retain a stone entrance, renew the roof above it and introduce a complementary panel pattern across the guest-room buildings.
Consider the exterior at several distances: the roofline seen on approach, the façade viewed across a courtyard and the details beside the entrance. Review samples alongside the materials being retained, including masonry, glazing and existing architectural metalwork.
Spengler’s metal shingles and Quadro panels provide options for developing that material palette, subject to the selected system and application.
A completed cladding project shows how different materials can work together. At Evergreen Family Medicine in Roseburg, Oregon, Spengler supplied 16,000 square feet of Copper Penny PVDF-painted Galvalume Diamond shingles and 20,000 square feet of weathered-zinc Quadro panels. Both systems are wall cladding on that medical building.
For a hotel renovation, the design opportunity is to give the renewed surfaces a considered relationship to each other and to the architecture the owner wants to preserve.
Detail the connections to the existing building
A new roof meeting a retained masonry wall needs a resolved transition. New cladding around existing windows needs defined terminations. A canopy joining a renewed façade needs its connections coordinated with the surrounding work.
These locations should appear in the drawings and the component schedule. Identify who will verify dimensions, prepare the supporting construction and coordinate the installation sequence.
The U.S. Department of Energy’s metal-roof guidance emphasizes attachment, underlayment and properly integrated flashing. For renovation work, the practical question is how those relationships will be maintained where new construction meets existing construction.
Spengler can discuss the field material and associated fabricated metalwork together, including specified perimeter flashings, roof-to-wall transitions, ridges, hips, valleys and cladding trims. With the junctions defined, the material quotation can reflect the building shown in the drawings.
Our technical support for architects and contractors also provides a way to discuss design details, installation questions and training needs while the scope is developing.
Match each assembly to the property’s exposure
The material selection belongs alongside the technical requirements. Ask the design team to establish the relevant wind loads, supporting construction, attachment requirements and water-management details for each proposed application.
For coastal properties, discuss the metal, finish, fasteners and surrounding materials in relation to the site’s exposure. Include applicable finish-warranty terms in the review. Where the design combines metals, address their compatibility and the paths water will take across the building.
Evaluate the roof and wall assemblies individually. Documentation used for a particular roof configuration needs to match the configuration being specified. A proposed rainscreen system also needs its wall support, drainage, ventilation and attachment details defined.
Our guide to hurricane-resistant metal roofing for commercial and institutional buildings discusses the relationship between reported testing and the specified roof assembly. The commercial metal wall cladding guide addresses material selection and fabrication scope for large façade projects.
Plan the whole property, then organize the phases
A substantial hotel renovation may extend across guest-room buildings, a main lodge, restaurants and other facilities. Show the intended final exterior when discussing the work with the manufacturer, even when construction will happen in stages.
For example, an owner might replace the main building’s roof first and renew a guest-room wing’s cladding in a later phase. The eventual junction between those areas still belongs in the design. Planning that connection early gives both phases a defined arrangement to work toward.
Provide the anticipated total roofing and cladding areas, then identify the quantities and components associated with each phase. Discuss material and finish availability, fabrication sequencing, packaging and delivery requirements with Spengler as the schedule develops.
The contractor’s site plan should address guest access, work areas, staging, temporary weather protection and the construction sequence. Coordinate material deliveries with that plan and identify who will receive, store and handle them.
For the owner, a defined overall scope makes it easier to evaluate each phase in relation to the complete renovation.
Build a quotation around the actual work
A useful proposal makes its inclusions clear. Identify the field shingles or panels, specified attachment components, fabricated trims and transitions, packaging, freight and any agreed project support.
The overall renovation budget also needs to account for removal, supporting repairs, installation, access equipment and temporary protection. Clarify which allowance is being discussed when requesting the metalwork quotation.
Share the working budget and the decisions already made about materials and finishes. If the project is still being developed, identify the options your team wants to compare and the information needed for the next approval.
This is a useful time to involve Spengler. We can discuss the proposed systems, fabrication requirements and details that need resolution before the material scope is finalized.
Bring Spengler the plans for your hotel renovation
If you are planning a substantial hotel roof replacement, a façade renovation or exterior work across several resort buildings, send us the full anticipated scope.
Include the project location, roof plans, exterior elevations, photographs of existing conditions, approximate roof and wall areas, proposed materials and intended construction phases. Mark the areas to remain and the areas to be replaced. Share available design criteria, the working material budget and your target schedule.
Spengler Industries welcomes inquiries from hotel owners, developers, architects and contractors planning substantial metal roofing and wall cladding orders. We can discuss how the selected systems and fabricated details fit the property you intend to create.
Contact Spengler Industries about your hotel renovation, call 801-462-5264