Forged in 1984.
Proven since the Middle Ages.

Metal Shingle Roof Cost: Five Things That Drive the Price

Metal shingle roof cost comes down to five things: the shape of the roof, the material and finish, where the building stands, the trim and accessories, and who installs it. Anyone who gives you a price per square foot before asking about those five is guessing.

We would love to print one tidy number here. The trouble is that two roofs of the same size can differ in price by a wide margin, and for good reasons. Here is what actually moves the number, so you can read any quote with a clear eye.

1. The shape of the roof

Complexity is usually the biggest driver. A simple gable goes down quickly. Hips, valleys, dormers, turrets and curves all take more cutting, more flashing and more hours.

Pitch matters too. A steep roof needs more staging and more care, and that time shows up in the price. Complex roofs are our specialty, and we are happy to say they are never the cheap kind.

2. Material, finish and grade

Our diamond metal shingles are made from Galvalume coated steel with a painted finish. Within that, three choices move the price:

  • Color. Standard colors cost less than a custom match.
  • Finish. Specialty finishes, such as wood grain, cost more than a solid color.
  • Grade. Near the coast, we recommend marine grade within 1,500 feet of salt water. It costs more, and it is worth it there.

3. Where the building stands

Climate writes part of the specification. Snow country calls for snow guards. Coastal and high wind sites call for the right grade and the right fastening. Freight counts as well, since a roof shipped across the country costs more to deliver than one going across town.

4. Flashings, trim and accessories

Valleys, ridges, eaves, wall transitions, chimneys, skylights and vents all need metal made to fit. This is where roofs leak, and it is also where a low quote tends to save its money.

Flashings fabricated for your building cost more than generic pieces bent on site. They are also the difference between a roof you forget about and a roof you get to know very well.

5. Who installs it

Labor is a large share of any roof. A crew that knows the system works faster, wastes less and gets the details right the first time.

A low bid from a crew that has never laid metal shingles is often the most expensive option on the table. On large or complex projects, we offer on-site training and assistance so the installation matches the product.

Metal shingle roof cost over the life of the roof

A metal roof usually costs more on day one than asphalt, and it is replaced far less often. The Metal Roofing Alliance has a useful comparison of metal and asphalt roof costs if you want the wider picture.

When a price looks low, ask one question: was a cost removed, or was it only moved? Thinner details, generic flashings and an inexperienced crew all lower the first number. The cost comes back later as repairs, leaks and an early replacement, and by then it is yours alone.

How to get a real metal shingle roof cost

Send us these and we can give you a number that means something:

  1. Where the building is
  2. Plans, or roof measurements and pitch
  3. Photos, if the building already exists
  4. The color or finish you have in mind
  5. Your timeline

Contact Spengler Industries to start a quote, or browse the metal shingle gallery for ideas first.

Frequently asked questions

Is a metal shingle roof more expensive than asphalt?

Up front, usually yes. Over the life of the building the gap narrows, because a well made metal roof is replaced far less often.

Why can I not get a price per square foot?

Because size is only one part of the price. Roof shape, finish, location, flashings and labor can change the total more than the square footage does.

Does the color affect the price?

Yes. Standard colors cost less than custom color matches and specialty finishes such as wood grain.

Can I lower the cost without lowering the quality?

Often, yes. Choose a standard color, keep details simple where you can, and bring the fabricator in while the roof is still being designed.

Spengler Industries